Yes even my toys have toys
If you don't know what it is, don't ask.
if you know what it is, keep it to yourself
if you know what it is, keep it to yourself
Tuesday 29 December 2009
Monday 14 December 2009
Battle Sister Realized
For those who's been wondering what I've been doing props & costumes wise since the last update, THIS is what I've been working on for the last 3 to 6 months...
I had no prior experience in armored costume making, or any kind of training in this field. All I had was an enthusiasm to learn, and to observe how others make stuff.
Before I get down to the nitty-gritty of what the costume is made of, here are some beauty shots. Thanks so much to Radzie(http://ziedesign.com/blog/) of Sri Gaya Studio for taking these photos for a song.
Torso armor (including shoulder guards) is made entirely of plumbing pipe, shaped with a heat gun; Chest cups were fashioned out of plastic bowls; Collar is cut from a bucket; relief details on shoulder guard and chest cup, and the purity seals were sculpted out of paper clay. the skull on the 'I' was made out of paper clay, then casts in resin using a silicon mold.
Vembraces & Grenades were made from plumbing pipe as well. Finger gauntlets were fashioned out of Wonderflex , which is self-adhesive while its still hot. The skull on the cross was made out of paper clay, then casts in resin using a silicon mold.
Corset is purchased, and beads sewn on by our female costumer.
The base for the leg armor are the only fibreglass pieces in this costume, They were purchased, and started out as Clone Trooper leg armor. I had to modify them extensively to make them fit our female costumer. The base for the knee guards are made of plumbing pipe, and the relief details sculpted out of paper clay. Armor plating on the shoe is made of Wonderflex.
She is seen holder a couple of grenades which I made for fun while waiting for epoxy and putty to dry. They're sized to fit into the magazine chamber and fired like regular rounds.
Close up of the knee guards.
The squarish part of the backpack is made of corrugated cardboard, then covered with mounting board. The rounded section on top is a combination of plumbing pipe, MDF board, perspex sheet, and couple of plastic bowls. The spikes are cast resin.
Close up of the backpack and shoulder guard.
The hose is leftover from a TIE Fighter Pilot helmet I purchased sometime ago.
Backpack detail & close up of purity seal.
The Bolter is constructed almost entirely out of foam board. The handle is made of MDF board, and extends all the way up to the top and out to the front in an 'L' shape to give the whole thing a 'spine' to rest on. The muzzle is a plumbing pipe.
The creators
Joanna (costumer): All soft parts and sculpted details
Daniel (on left): Bolter base structure
Myself: Everything else except the finger gauntlets (hand guard), wich were made by Edgar
Special thanks to:
Shariff for helping with the backpack, and looking for the chain.
Julian for financial support & constant encouragement
and all others who provided support in one way or another, whether physically or in spirit.
I had no prior experience in armored costume making, or any kind of training in this field. All I had was an enthusiasm to learn, and to observe how others make stuff.
Before I get down to the nitty-gritty of what the costume is made of, here are some beauty shots. Thanks so much to Radzie(http://ziedesign.com/blog/) of Sri Gaya Studio for taking these photos for a song.
Torso armor (including shoulder guards) is made entirely of plumbing pipe, shaped with a heat gun; Chest cups were fashioned out of plastic bowls; Collar is cut from a bucket; relief details on shoulder guard and chest cup, and the purity seals were sculpted out of paper clay. the skull on the 'I' was made out of paper clay, then casts in resin using a silicon mold.
Vembraces & Grenades were made from plumbing pipe as well. Finger gauntlets were fashioned out of Wonderflex , which is self-adhesive while its still hot. The skull on the cross was made out of paper clay, then casts in resin using a silicon mold.
Corset is purchased, and beads sewn on by our female costumer.
The base for the leg armor are the only fibreglass pieces in this costume, They were purchased, and started out as Clone Trooper leg armor. I had to modify them extensively to make them fit our female costumer. The base for the knee guards are made of plumbing pipe, and the relief details sculpted out of paper clay. Armor plating on the shoe is made of Wonderflex.
She is seen holder a couple of grenades which I made for fun while waiting for epoxy and putty to dry. They're sized to fit into the magazine chamber and fired like regular rounds.
Close up of the knee guards.
The squarish part of the backpack is made of corrugated cardboard, then covered with mounting board. The rounded section on top is a combination of plumbing pipe, MDF board, perspex sheet, and couple of plastic bowls. The spikes are cast resin.
Close up of the backpack and shoulder guard.
The hose is leftover from a TIE Fighter Pilot helmet I purchased sometime ago.
Backpack detail & close up of purity seal.
The Bolter is constructed almost entirely out of foam board. The handle is made of MDF board, and extends all the way up to the top and out to the front in an 'L' shape to give the whole thing a 'spine' to rest on. The muzzle is a plumbing pipe.
The creators
Joanna (costumer): All soft parts and sculpted details
Daniel (on left): Bolter base structure
Myself: Everything else except the finger gauntlets (hand guard), wich were made by Edgar
Special thanks to:
Shariff for helping with the backpack, and looking for the chain.
Julian for financial support & constant encouragement
and all others who provided support in one way or another, whether physically or in spirit.
Subscribe to:
Posts (Atom)
